高速公路隔离墩钢模具的形状

**jxmjzz** · 发表于 2021-12-27 15:21:47

高速公路隔离墩钢模具的形状分为很多种，可以满足不同工程的使用需求，这款产品

尺寸标准，满足了人们的使用需求，实用性强，结构设计合理，操作简单，而且选择

的原材料都是经过严格的挑选设计出来的，有效的提高了使用效率，增加了使用寿命

。
隔离墩模具符合设计原理，种类丰富，操作简单，一般应用于高速公路两侧使用，有

效的确保车辆不容易出现跑偏的情况，降低各种损失，可多次重复使用，价格优惠。

高速公路隔离墩模具是生产隔离墩的主要工具，而且高速公路隔离墩模具拥有独特的

个性可以拆开进行脱模，其在水泥制品模具行业内是拆模具是较为简单的，所以清洗

其内壁也是较为方便，高速公路隔离墩模具作为典型钢模具的代表，在常用高速公路

隔离墩模具中属于较为稳定的一种，一般长度为2米，高速在80—100厘米之间进行选

择，在预制的时候需要带翻转边的位置。

There are many shapes of steel mold for Expressway isolation pier, which

can meet the use needs of different projects. This product size standard

meets people's use needs, has strong practicability, reasonable structural

design and simple operation, and the selected raw materials are strictly

selected and designed, which effectively improves the use efficiency and

increases the service life.

The isolation pier mold conforms to the design

principle, has rich types and simple operation. It is generally used on

both sides of the expressway to effectively ensure that the vehicle is not

prone to deviation, reduce various losses, and can be reused for many

times with favorable prices.

The expressway isolation pier mold is the main

tool for producing isolation piers. Moreover, the expressway isolation

pier mold has a unique personality and can be disassembled for demoulding.

It is relatively simple to disassemble the mold in the cement product mold

industry, so it is more convenient to clean its inner wall. The expressway

isolation pier mold is a representative of typical steel mold, It is a

relatively stable one among the commonly used Expressway isolation pier

molds. The general length is 2m, and the high speed is between 80-100cm.

The position with overturned edge is required during prefabrication.

高速公路隔离墩钢模具的形状

网站推荐 /1