推广贵宾
- 最后登录
- 2022-1-10
- 注册时间
- 2021-12-7
|
楼主
jxmjzz 发表于 2021-12-11 14:06:05
防撞墙模具 水泥防撞墙模具 其实在各地的高速公路以及普通公路的修建都有着供应使用，对于
这款模具而言，其实更为重要的便是怎样去进行操作，并且如何保证模具生产后的成品质量。防撞墙
模具 水泥防撞墙模具多为钢材料制作成型，这种模具与防撞墙模具 水泥防撞墙模具的形状是类似的
，在使用的时候却需要通过现浇的工艺进行模具的使用，在加工之前要确定好这几块模具是可以进行
拼接的，例如模具的底板以及侧板是配套的，要求整体不能够出现过于明显的磨损或者是生产的问题
，只有这样才能够保证模具可以正常的加工。
The anti-collision wall mold, the cement anti-collision wall mold, actually in each place
highway as well as the ordinary highway construction has the supply use, regarding this
mold, actually more importantly is how carries on the operation, and how to ensure the
quality of finished products after mould production. Anti-collision wall mold, cement
anti-collision wall mold is mostly made of steel. This mold is similar to the shape of
anti-collision wall mold, cement anti-collision wall mold, but when used, the mold needs
to be used through the cast-in-place process, before processing to make sure that these
pieces of die can be spliced, such as the mold bottom plate and the side plate is a
complete set, require that the whole can not appear too obvious wear or production
problems, only in this way can guarantee the mold can be normal processing.
在使用防撞墙模具 水泥防撞墙模具时要求工人将模具清理干净，这款模具其实与隔离墩的差距并不是
非常大，尺寸以及形状方面都要非常相似，制作出来的成品作用也是相同的。在现浇的时候要求将模
具提前清理干净，拼接时确定好加工的位置，直接将模具进行固定，如果担心出现漏浆的情况，可以
在外面增加一层抗压装置，内腔中刷油后放入泥浆的管道，通过管道开始泥浆的浇筑，进行排气处理
后就可以等待泥浆的凝固了。
In the use of anti-collision wall mold, cement anti-collision wall mold requires workers
to clean up the mold, this mold and the gap between the pier is not very large, size and
shape are very similar, the finished product does the same thing. When pouring, the mould
should be cleaned up in advance, the machining position should be determined when
splicing, and the mould should be fixed directly. If slurry leakage is feared, a layer of
anti-pressure device can be added outside, in the cavity after the oil brush into the mud
pipe, through the pipe began pouring mud, exhaust treatment can wait for the
solidification of the mud.
|
|
/1 
