推广贵宾
- 最后登录
- 2022-1-10
- 注册时间
- 2021-12-7
|
楼主
jxmjzz 发表于 2021-12-8 16:15:27
高速安全岛模具型号可以依据其结构特征以及尺寸大小进行划分，这样无论是运输还是保存都能够进行分层平方和分格竖放的方式，这种钢模具要尽量放到室内保存，高速收费岛钢模具，这是为了确保其能够在一个合适的温度和湿度的条件下，如果没有条件需要在露天进行保存的话，我们需要在模具上满覆盖上帆布或者铁皮，防止出现风吹雨淋的情况，而让模具的表面出现锈浊。高速安全岛模具无论是在室外保存或者室内保存都应该按照形状和大小的不同来进行分隔开，将其整齐的堆放在地面上，同时堆放的高度也不能超过2.3米，不能有乱摆乱放的情况出现，收费岛模具厂家，在这个期间，为了防止钢模具出现质变的情况，可以在表面涂上一层防锈剂进行保护，如果出现局部脱落的情况应该及时进行补填。高速安全岛模具做为一种节能环保的重要产品，它的优势除了能够循环利用，生产过程不会对环境造成影响，失效之后还能够进行回收。
The mold model of high-speed safety island can be divided according to its structural characteristics and size, so that it can be placed vertically in layers, squares and grids whether it is transported or stored. This steel mold should be stored indoors as far as possible. The steel mold of high-speed toll island is to ensure that it can be stored at an appropriate temperature and humidity, If there is no condition for preservation in the open air, we need to cover the mold with canvas or iron sheet to prevent wind and rain from causing rust and turbidity on the surface of the mold. Whether the high-speed safety island molds are stored outdoors or indoors, they should be separated according to different shapes and sizes, and stacked neatly on the ground. At the same time, the stacking height should not exceed 2.3m, and there should be no random placement. The toll Island mold manufacturer, in order to prevent qualitative change of steel molds during this period, The surface can be coated with a layer of antirust agent for protection. In case of local falling off, it shall be filled in time. As an important product of energy conservation and environmental protection, high-speed safety island mold has the advantages of recycling, no impact on the environment in the production process, and recycling after failure.
|
|
/1 
